Multifak EP
Multipurpose automotive and industrial grease
Multifak® EP greases are multipurpose extreme pressure greases suitable for use with automotive, industrial and off highway equipment applications.
Can include;
- Industrial plain and rolling element bearings
- General plant lubrication
- Centralized lubrication systems (NLGI 00, 0 & 1)
- Construction equipment bearings
- Earthmoving, quarrying and mining
- Agricultural equipment
- Automotive wheel bearings
- Chassis grease point lubrication
- Deck equipment
Usable temperature range in continuous service and DIN/ ISO Classification:
| GRADE | OPERATING TEMPERATURE | DIN 51 502 | ISO 6743-09 |
| NLGI 00 NLGI 0 NLGI 1 NLGI 2 NLGI 3 | -35 to 80°C -30 to 100°C -30 to 120°C -30 to 130°C -30 to 130°C |
KP 3 K-20 |
ISO-L-XBCEB 3 |
Multifak EP greases deliver value through:
- Good water resistance — Resistance to washout of bearings.
- Good corrosion protection — Inhibited to protect bearing surfaces.
- Good oxidation stability — Helps to support long life in storage and in use.
- Simplified lubrication — One grease designed to satisfy many different industrial grease requirements.
- Low oil separation tendency — Recommended for use in typical centralized lubrication systems.
- Protects metal surfaces — Effective EP additive protects against component wear under high load conditions. Rust and corrosion inhibitors protect metal surfaces.
- Good pumpability — Good pumpability characteristics of the lithium thickener provide suitable flow properties for grease pump application systems (NLGI 00, 0, 1).
| MULTIFAK EP | 0 | 00 | 1 | 2 | 3 |
| Allmineral Lube Chart | - | A | A | A | - |
| Grob Lubricant Chart | - | A | - | A | - |
| Kamome-Propeller Listing | A | - | - | - | - |
| MAN Truck & Bus (Traton) 283 Li-P 2 | - | - | - | A | - |
| PEKRUN WERKNORM N8053 | - | A | - | A | - |
| SMS Group SN 180-1 | A | A | - | A | - |
| Volvo 97718 | - | - | - | A | - |
| WALDRICH SIEGEN Lubricants for machine tools | - | - | - | A | - |
| DIN 51 502: KP0K-30 | M | - | - | - | - |
| DIN 51 502: KP1K-30 | - | - | M | - | - |
| DIN 51 502: KP2K-30 | - | - | - | M | - |
| ISO 6743-9: L-XCCEB 0 | M | - | - | - | - |
| ISO 6743-9: L-XCCEB 1 | - | - | M | - | - |
| ISO 6743-9: L-XCDEB 2 | - | - | - | M | - |
A: Approved
M: Meets the requirements
Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices