Delo Gear CGA SAE 80W-90
High performance extended drain gear oil
Delo® Gear CGA SAE 80W-90 is a high-performance extended drain gear oil, designed for use in heavy-duty automotive vehicle driven axles and differentials.
Applications
- Delo Gear CGA SAE 80W-90 is designed for extended drain in heavy duty final drives (driven axles and differentials) in commercial vehicles, and helps offer service considerably beyond what is normally possiblewith mineral-based formulations – as much as 3 times longer than standard mineral oils. (The precise service interval varies according to application and service severity – refer to the manufacturers’ manual for further details)
- Delo Gear CGA SAE 80W-90 promotes robust performance in high load and high operating temperature conditions. The clean-gear additive system used in the formulation helps prevent sludge and depositformation.
- Delo Gear CGA SAE 80W-90 has numerous OEM approvals, including DTFR 12B110 and MAN 342 Type M3.
- The friction characteristics of Delo Gear CGA SAE 80W-90 make it generally unsuitable for use in synchronised manual transmissions and transaxles, except in applications where this type of fluid is specifically recommended (for example, MAN 341 Type GA1 and Scania STO 1:0).
Customer benefits
- Designed for extended drain of up to three times longer than standard mineral oils in heavy-duty final drives and differentials.
- Formulated for oxidation stability and oil thickening resistance, and helps keep gear cases, bearings and seals free from harmful deposits.
- Offers good low-temperature fluidity allowing fast circulation and wear protection during cold start-up.
- Extreme pressure (EP) additives promote reliable protection against component scuffing and wear.
- Mild-EP non-corrosive additive helps protect sensitive copper alloy components.
approvals, performance and recommendations
| DELO® GEAR CGA |
SAE 80W-90 |
| Daimler Trucks DTFR 12B110 |
Approved |
| MAN Truck & Bus (Traton) 342 Typ M3 | Approved |
| Performance Review Institute SAE J2360 |
Approved |
| Scania (Traton) STO 1:0 |
Approved |
| Volvo 97321 |
Approved |
| ZF TE-ML 05A, 12L, 12M, 16B, 17B, 19B, 21A |
Approved |
| API GL-5 |
Meets requirements |
| API MT-1 |
Meets requirements |
| ZF TE-ML 07A |
Meets requirements |
Consult OEM representatives for independent verification, updates and recommendations.
Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices
OUR BRANDS
