Regal Premium EP
Efficient performance high temperature gas turbine lubricant
Regal Premium EP is an efficient performance high temperature gas turbine lubricant, which is also suitable for use in steam turbines. This means Regal Premium EP is also suitable for use in combined cycle units, with single lubrication systems.
Applications
- Regal Premium EP is recommended for steam and gas turbines, with and without gearboxes
- Regal Premium EP is primarily recommended for use in heavy duty industrial gas turbines where reservoir oil temperatures are up to +100 °C and where gas temperatures in the bearing housings exceeds +400 °C.
- The suitability for steam and gas turbine applications makes Regal Premium EP the preferred lubricant for combined cycle units with single lubrication systems
- Regal Premium EP is suitable for the lubrication of a wide range of equipment associated with the turbines for which it is recommended. Typical applications include air compressors, bath and circulating systems supplying bearings of many types, lightly to moderately loaded gear sets, pumps, electric motors and low to moderate pressure hydraulic systems
This product is not recommended for aviation gas turbines in either aircraft or non-aviation service.
Customer benefits
- High temperature oxidation stability promotes increased oil service life under high thermal and mechanical stress
- Robust resistance to sludge and acidic oxidation product formation helps avoid valve sticking and bearing corrosion
- Rapid water separation contributes to constant system lubrication and component protection
- Foam resistance and rapid air release provide uninterrupted lubrication and system protection
Approvals
Regal Premium EP 32/46 is approved against:
- Siemens TLV 9013 05 for use in turbosets with and without gearboxes
- Siemens gas turbine type SGT 200
- Alstom HTGD 90117
- Skoda Power TP 0010P
Performance
| Standards |
VG 32 |
VG 46 |
VG 68 |
| DIN 51515/T1 L-TD and L-TG | X | X | X |
| ISO 8068 (type L-TSE and L-TGE) | X | X | X |
| BS 489 | X | X | X |
| ASTM D4304 | X | X | X |
| GEC Alstom NBA P50001 A / NBA P50003 A | X | X | |
| General Electrics GEK 27070 / GEK 46506 E for use in steam turbines | X | ||
| General Electrics GEK 28143A for use in moderate gas turbines (GT 5000 or 6B) | X | ||
| General Electrics GEK 32568F for use in heavy duty gas tubines with bearings (frame 9E and 9FA) | X | ||
| General Electrics GEK 101941A gas turbines with anti wear additives with bearings (Frame 6FA) | X | ||
| Fiat Avio TS 5001 spec. (lubricating & cooling oil specification for gas turbines) | X | ||
Siemens gas turbine type SGT 200 AR-M350_20111017_135639 P= 6750 KW, 11053 RPM |
X | ||
| Siemens (former ABB-stal) MAT81 21 01 and 81 21 02 specifications. Also known as Demag Delaval Turbomachinery spec. | X | X | |
| Atlas Copco 790.21.2E spec. for use in expansion turbines and turbo compressors | X |
X | |
| MAN TURBO TQL-T2 | X |
||
| Solar ES9-224 (Class II) spec. | X | X |
|
| KEMA keuringseisen M23b | X |
X | X |
| Laborelec requirements | X | X |
Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices
